Schick CDRPan, Руководство по установке

Страница: 26 / 33

4. Remote Module, Power Supply, and PCI Board
4.1 Install Remote Module
4.1.1 Tools and Materials
To install the remote module, you will need velcro patches to secure the module to the
top of the panoramic machine, and a screwdriver to secure the sensor cable connector to
the remote module.
4.1.2 Step-by-Step Instructions
A. Apply velcro to the top of the panoramic machine, along the top edge of the rotational
arm. This will make it easy to see the status lights on the module.
B. Apply velcro to the bottom of the remote module also, and mount the remote module
to the panoramic machine.
C. Connect the sensor cable to the remote module. Then, use a small screwdriver to
tighten the screws on the 37-pin connector.
B1051109 Rev. – (Draft 2) Panelipse Installation 18