background image

WARNINGS

Keep this manual for possible future needs

Pay attention not to pour liquids onto the device and do not operate in conditions of excessive 

humidity

Do not install the device close to sources of excessive heat, do not expose it to direct solar radiation 

and do not position it without protection in a dusty environment

Be sure that the mains voltage does not exceed the value indicated on the back panel

Do not use the device if the mains cable or the plug aren’t in a perfect condition (if necessary, replace 

it)

If the mains cable has to be replaced, the operation must be carried out by qualified personnel. 

Replace the cable exclusively with one that is an exact substitute

In order to avoid interference, do not install the device close to power transformers, TV sets, RF 

transmitters, electric motors or any source of electric energy

Do not point microphones against speakers: this could generate annoying whistles (Larsen effect) that 

cause damage

In order to avoid unpleasant and costly inconveniences, use only original connecting cables

To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug 

from the AC socket

When cleaning, do not use solvents (e.g. acetone or alcohol). These could damage the external

finishing and the serigraphy

Do not attempt to service this product. In case of malfunction of any part of the system call the 

nearest technical assistance centre or a specialized technical centre

For good ventilation, the dissipation vents should never be covered or obstructed by blankets, sofas or 

similar furniture. Be sure also to leave sufficient clearance between the dissipation vents and any other 

surface

No source of flames, e.g. candles, should be placed on or near the device

WARNING

PRECAUTIONS

Read carefully this manual and 

follow these precautions before 

Содержание LaFaro DELUXE










Отзывы: