Schertler ELYPS AB10, Руководство пользователя

Страница: 5 / 12

5
OPERATIONAL SAFETY
•
During installation or live performances, make sure that your PA system’s power supply cable cannot
be walked on, tripped over or “pinched” – particularly at sockets, around waste bins etc. Also make
sure that the power supply cable is not “stressed” at its point of connection to the PA system.
• To avoid interference, do not install your PA system near power transformers, TV sets, RF transmitters,
electric motors, or any other sources of electrical energy.
• To avoid potential accidents, only use attachments, accessories and other equipment such as carts,
stands, tripods, brackets or cases that are specified or recommended by the manufacturer, or sold with
your mixer.
• Loud volume levels can cause irreparable damage to hearing, so avoid the following while using your
PA system:
- acoustic feedback (never point microphones directly at a loudspeaker)
- high levels of distortion
- impulse noises (loud “pops”) that can occur when a device is switched on/off, connected to or di‐
sconnected from a system.
MAINTENANCE AND REPAIR
•
Your PA system can be carefully cleaned, as necessary, using a dry cloth. No water must be used.
• When cleaning, do not use any solvents (such as acetone or alcohol). These could damage the PA
system’s finish and its labeling.
• Visually check your PA system on a regular basis for any signs of wear and tear or damage, but do
not attempt any kind of servicing or repair.
• If your PA system malfunctions, or has been damaged, e.g. if the power supply/cable or plug is
damaged, liquid has been spilled or objects have fallen inside, the PA system has been exposed to rain
or moisture, does not operate normally, or has been dropped, please call your nearest SCHERTLER
technical assistance centre. (For more information, contact us at the address on the last page of this
manual.)