Schertler ELYPS AB10, Руководство пользователя

Страница: 4 / 12

ELYPS
PA SYSTEM
IMPORTANT SAFETY
INFORMATION
SAFETY FIRST!
Safety is of major importance when operating any electrical equipment, so
please note the following:
On a product, a lightning flash within a triangle indicates the presence of
uninsulated “dangerous voltage” within the product enclosure. This may be of
sufficient magnitude to cause risk of electric shock.
ELECTRICAL SAFETY
•
Before connecting your PA system to the mains, make sure that the mains voltage does not exceed the
voltage specified on the device.
• Do not use your PA system if its mains cable or plug are not in perfect condition. Replace these as
necessary. The replacement cable must be the same as the original.
• Your PA system should only be connected to a mains socket with a ground protection system.
• When using or installing your PA system, make sure that the mains socket and the amplifier’s mains
cable and plug are easily accessible.
• Do not, under any circumstances, defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade and third prong are provided for your safety. If the
supplied plug does not fit your mains socket, consult an electrician for replacement of the obsolete
socket.
• Do not expose your PA system to rain or any other water (even in small amounts). Do not use the PA
system near water.
• Avoid spilling drinks or any other liquids on the PA system.
• Do not operate your PA system in excessively humid conditions. Avoid excessive heat from sunshine,
fire or similar. If the PA system is being used in a dusty environment, make sure it is adequately
protected.
• Avoid using or installing your PA system near any heat sources such as radiators, heat registers, stoves,
or other heat-producing apparatus. Do not put any sources of open flame (e.g. candles or
pyrotechnics) on or near the PA system.
• Do not cover your PA system during use, or obstruct the ventilation flow in any way.
• Always leave sufficient clearance between the heat sink and any other surface.
• Unplug your PA system during lightning storms, or if it is not going to be used for a while. (Remove the
plug from the mains socket to completely disconnect the PA system.)
• Your PA system does not contain any “user serviceable” parts. Servicing and/or repairs should only
be carried out by qualified personnel. See MAINTENANCE AND REPAIR.