www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
24 GB
Cutting speed saw blade
m/sec
52
52
52
Weight
kg
81
92
114
Power unit
Motor
V/Hz
220 - 240 / 50
380 - 420 / 50
petrol
Input power P1
kW
2,1
5,2
9 kW
Output power P2
kW
1,5
3,58
Operating mode
S6 / 40%
S6 / 40%
Rated current
A
10
10
Work information
Cutting height Spar
max. mm
240
min. mm
60
Turning cut
max. mm
250
Piece of wood
max. mm
380x240
Reserve technical changes!
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2
from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts
under the foundations of ISO 7904 supplement a performed working conditions to.
Sound pressure level in dB
Idle L
WA
/ Processing L
WA
105 / 107
Sound pressure level on working site in dB
Idle LqAeq / Processing LqAeq
95 / 97
The specified values are emission values and therefore should not at the same time be reliable working site values. Al
-
though there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions
need to be taken or not. Factors, which influence the actual availabe immusion value on working site, include the peculi
-
arities of working area, other sources of noise, e.g. the number of machines and other adjoining processes. The allowed
working values could vary from country to country. However, the information should qualify the user, to be able to make
an estimation of the dangers and risks.
8. Scope of delivery
• Rocker circular saw
• Allen key or open-end wrench
• Locking pin
• Operating instructions
9. Assembly
The machine is supplied completely assembled them, and is therefore ready to use.
10. Setting-up and adjustment
•
Please pay attention that your rocker circular saw is set up stable and on a leveled floor.
• The workplace must be well lit.
• There should be no obstacles to the machine.
