Scheppach 5906135901, Перевод с оригинального руководства пользователя

Страница: 19 / 104


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
GB
| 19
3 Protect yourself from electric shock
–
Avoid physical contact with earthed parts (e.g.
pipes, radiators, electric ranges, cooling units).
4 Keep children away
–
Do not allow other persons to touch the equip -
ment or cable, keep them away from your work
area.
5 Securely store unused electric tools
–
Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6 Do not overload your electric tool
–
They work better and more safely in the speci -
fied output range.
7 Wear suitable clothing
–
Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
–
Rubber gloves and non-slip shoes are recom -
mended when working outdoors.
–
Tie long hair back in a hair net.
8 Do not use the cable for purposes for which it is
not intended
–
Do not use the cable to pull the plug out of
the outlet. Protect the cable from heat, oil and
sharp edges.
9 Take care of your tools
–
Keep your compressor clean in order to work
well and safely.
–
Follow the maintenance instructions.
–
Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
–
Check extension cables regularly and replace
them when damaged.
10 Pull the plug out of the outlet
–
During non-use of the electric tool or prior to
maintenance and when replacing tools.
11 Avoid inadvertent starting
–
Make sure that the switch is switched off when
plugging the plug into an outlet.
12 Use extension cables for outdoors
–
Only use approved and appropriately identified
extension cables for use outdoors.
–
Only use cable reels in the unrolled state.
13 Remain attentive
–
Pay attention to what you are doing. Remain
sensible when working. Do not use the electric
tool when you are distracted.
14 Check the electric tool for potential damage
–
Protective devices and other parts must be
carefully inspected to ensure that they are fault-
free and function as intended prior to continued
use of the electric tool.
–
Check whether the moving parts function fault -
lessly and do not jam or whether parts are dam -
aged. All parts must be correctly mounted and
all conditions must be fulfilled to ensure fault-
free operation of the electric tool.
• Check that the delivery is complete.
• Check the device and accessory parts for trans -
port damage.
• If possible, store the packaging until the warranty
period has expired.
m
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas -
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
4. Intended use
The compressor is designed to generate com -
pressed air for compressed-air driven tools which
can be driven with an air volume of up to approx.
189 l/min (e.g. tire inflator, blow-out pistol and paint
spray gun).
Due to the limited air output it is not possible to use
the compressor to drive tools with very high air con -
sumption (for example orbital sanders, rod grinders
and hammer screwdrivers).
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac -
turer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been de -
signed for use in commercial, trade or industri -
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Safety information
m
Attention! The following basic safety measures
must be observed when using electric tools for pro -
tection against electric shock, and the risk of inju -
ry and fire. Read all these notices before using the
electric tool and keep the safety instructions for later
reference.
Safe work
1 Keep the work area orderly
–
Disorder in the work area can lead to accidents.
2 Take environmental influences into account
–
Do not expose electric tools to rain.
–
Do not use electric tools in a damp or wet envi -
ronment. There is a risk of electric shock!
–
Make sure that the work area is well-illuminated.
–
Do not use electric tools where there is a risk of
fire or explosion.