www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
GB І 11
GB
Caution - Read the operating instructions to reduce the risk of inquiry
GB
Wear safety goggles!
GB
Wear ear-muffs!
GB
Wear a breathing mask!
m
GB
Warning! Danger to life, risk of injury or damage to the tool are possible
by ignoring!.
GB
Protection class II
Device Description (Fig. 1)
1
Additional handle
2
Connection for dust extractor
3
Lock button
4
ON/OFF switch
5
Handle
6
Lock nut
7
Clamping screw
8
Base plate
9
Setting screw for adjusting the sanding/grinding
belt
10
Dust bag
11
Drive rollers
12
Sanding/grinding belt
13
Clamping lever for sanding/grinding belt
Unpacking
•
Open the packaging and remove the device care
-
fully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for trans
-
port damage.
•
If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas
-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
Intended use
The belt grinder is designed for the dry surface sanding
of wood, plastic, metal and plaster and painted surfac
-
es (depending on the type of sandpaper used). The ap
-
pliance may only be used for dry sanding. Please note
that you need to use appropriate abrasive belts with
different grains for working different materials, and that
you may need to adapt the speed to suit the material.
The appliance is not intended for commercial use. Any
other use of or modification to the appliance is deemed
to be improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
General Power Tool Safety Warnings
m
WARNING!
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref
-
erence.
Introduction
MANUFACTURER:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu
-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
WE RECOMMEND:
Read through the complete text in the operating in
-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord
-
ance with the recommendations.
The operating instructions contain important infor
-
mation on how to operate the machine safely, pro
-
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in
-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con
-
cerning the operation of the machine and who are in
-
formed about the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety requirements in these oper
-
ating instructions and your country’s applicable regu
-
lations, you should observe the generally recognized
technical rules concerning the operation of wood
-
working machines.
