www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
20 |
GB
ing parts are working properly and move freely.
Check for any parts that are broken or damaged
enough to detrimentally affect the functioning of
the device. Have damaged parts repaired before
you use the device.
Many accidents have their ori
-
gins in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully
maintained cutting tools with sharp cutting edges are
less likely to jam and are easier to control.
g) Use the electrical power tool, accessories,
inserted tools etc. in accordance with these in
-
structions and advice, and the stipulations drawn
up for this particular type of device. In doing this,
take into account the working conditions and the
task in hand.
The use of electrical power tools for
purposes other than those intended can lead to dan-
gerous situations.
8. Additional Safety Warnings
Safety advice relating specifically to this device
Avoiding the danger of injury, fire and damage to
your health:
•
Securely support the workpiece. Use clamps or a
vice to grip the workpiece firmly. This is much safer
than holding it in your hand.
•
Always switch on the electrical power tool before
placing it against the workpiece. There is also the
risk of kickback.
•
Keep your hands away from the area of the saw
blade. Do not grip the underside of the workpiece.
Contact with the saw blade (14) may result in the
risk of injury.
•
Make sure that the base plate (9) lies on the work
-
piece when sawing.
•
If a dangerous situation arises, pull the mains plug
immediately out of the mains socket.
•
Always work with the mains lead leading away from
the rear of the device.
Warning! Noxious fumes!
Working with harmful /
noxious dusts represents a risk to the health of the
person operating the device and to anyone near the
work area. Wear protective glasses and a dust mask!
• Do not saw materials containing substances harm-
ful to health.
• Do not saw materials containing asbestos. Asbes-
tos is a known carcinogen.
•
When sawing wood and in particular when working
on materials that give rise to dusts that are hazard-
ous to health, the device must be connected to a
suitable dust extraction device.
•
Make sure you have adequate ventilation.
• Do not work on moistened materials or damp sur-
faces.
use the device if you are tired or under the in
-
fluence of drugs, alcohol or medication.
One mo-
ment of carelessness when using the device can lead
to serious injury.
b)
Wear personal protective equipment and al
-
ways wear safety glasses.
The wearing of personal
protective equipment such as dust masks, non-slip
safety shoes, safety helmets or ear protectors, ap
-
propriate to the type of electrical power tool used and
work undertaken, reduces the risk of injury.
c)
Avoid unintentional operation of the device.
Check that the electrical power tool is switched
off before you connect it to the mains, pick it up
or carry it.
Accidents can happen if you carry the
device with your finger on the ON / OFF switch or with
the device switched on.
d)
Remove any setting tools or spanners before
you switch the device on.
A tool or spanner left at-
tached to a rotating part of a device can lead to injury.
e)
Avoid placing your body in an unnatural po
-
sition. Keep proper footing and balance at all
times.
By doing this you will be in a better position to
control the device in unforeseen circumstances.
f)
Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves clear of moving parts.
Loose clothing,
jewellery or long hair can become trapped in moving
parts.
g)
If vacuum dust extraction and collection de
-
vices are fitted do not forget to check that they
are properly connected and correctly used.
The
use of these devices reduces the hazard presented
by dust.
4. Careful handling and use of electrical power
tools
a)
Do not overload the device. Always use an
electrical power tool that is intended for the task
you are undertaking.
By using the right electrical
power tool for the job you will work more safely and
achieve a better result.
b)
Do not use an electrical power tool if its switch
is defective.
An electrical power tool that can no
longer be switched on and off is dangerous and must
be repaired.
c)
Pull the mains plug out of the socket before
you make any adjustments to the device, change
accessories or when the device is put away.
This
precaution is intended to prevent you from uninten
-
tionally starting the device.
d)
When not in use always ensure that electrical
power tools are kept out of reach of children. Do not
let anyone use the device if he or she is not familiar
with it or has not read the instructions and advice.
Electrical power tools are dangerous when they are
used by inexperienced people.
e) Look after the device carefully. Check that mov
-
Содержание 5901807900
