Scheppach 5901505850, Перевод с оригинального руководства пользователя

Страница: 31 / 48

31 GB
15. Troubleshooting
Problem Possible cause Help
Motor does not work Motor, cable or plug defective, fuses burnt
Housing cover open (limit switch)
Arrange for inspection of the machine by a
specialist. Never repair the motor yourself.
Danger!
Check fuses and replace as necessary
Close housing cover exactly
The motor starts up
slowly and does not
reach operating speed. Voltage too low, coils damaged, capacitor
burnt Contact the utility provider to check the
voltage.
Arrange for inspection of the motor by a
specialist.
Arrange for replacement of the capacitor by a
specialist
Motor makes excessive
noise Coils damaged, motor defective Arrange for inspection of the motor by a
specialist
The motor does not
reach its full power. Circuits in the network are overloaded
(lamps,
other motors, etc.) Do not use any other equipment or motors on
the
same circuit
Motor overheats easily. Overloading of the motor, insufficient cooling
of the motor
Avoid overloading the motor while cutting,
remove
dust from the motor in order to ensure optimal
cooling of the motor
Saw cut is rough or
wavy Saw blade dull, tooth shape not appropriate
for
the material thickness Resharpen saw blade and/or use suitable saw
blade
Workpiece pulls away
and/or splinters Excessive cutting pressure and/or saw blade
not suitable for use Insert suitable saw blade
Saw blade is not running
straight a) Guide has been wrongly set
b) Wrong saw blade a) Set the saw blade guide according to the
operating instructions
b) Select a saw blade according to the
operating instructions
Burn marks appear on the
wood during the cutting
work a) Blunt saw blade
b) Wrong saw blade a) Change the saw blade
b) Select a saw blade according to the
operating instructions
Saw blade jams during
cutting work a) Blunt saw blade
b) Deposits on the saw blade
c) Guide has been set poorly a) Change the saw blade
b) Clean the saw blade
c) Set the saw blade guide according to the
operating instructions