Scheppach 5808201985, Перевод из оригинального руководства

Страница: 7 / 28

7
GENERAL INFORMATION
• Check all parts for any transportation damage after
unpacking them. In case of complaints, the supplying
carrier must be notified immediately. Later claims
will not be accepted.
• Check the shipment for completeness.
• Familiarise yourself with the device before using it,
by referring to the operating manual.
• Use only originals parts for accessories, wear parts
and spare parts. You will receive spare parts from
your specialist dealer.
• Indicate our article numbers as well as type and mo-
del of the device in your orders.
AB1600
Delivery contents
Demolition Hammer
Point chisel ø 30 L410
Flat chisel ø 30 L410
Oil can
Specifications
Blow count [1/min.]
2000
Dimensions L x W x
H [mm]
652 x 157 x 276
Blowing force [Joule]
50
Vibration level [m/
s2]
18.2
Weight [kg] 16
Drive
Motor V/Hz
230 V/50 Hz
Power consumption
P1 W
1600
Protection class B
Type of Protection IP20
Technical modifications subject to change!
CHARACTERISTIC NOISE VALUES
The noise at workplace may exceed 85 dB (A).
In this case noise protection measures are necessary for
the user. (Wear ear protection!)
Sound power level L
WA
= 105,0 db (A)
Sound pressure level LPA = 84,0 dB (A)
Exposure to noise can cause hearing loss. Total vibration
values determined according to EN ISO 3744.
Chisel
Vibration emission value ah = 18.2 m/s²
Note:
The vibration value will change due to the field of
application of the power tool and may exceed the speci-
fied value in exceptional cases.
The specified values are emission levels and do not ne-
cessarily represent safe working values.
Although there is a correlation between emission and
emission levels, it cannot be inferred with certainty whe-
ther additional precautions are necessary or not. Factors
that may affect the current emission levels present in
the workplace include duration of the effects, the type
of working room, other noise sources, etc., the number
of machines and other adjacent processes. The reliable
working values may vary from country to country. Never-
theless, this information should enable the user to make
an assessment of hazard and risk.