Schenker N151RF1, Руководство пользователя, Страница: 39 / 292

System Startup 1 - 5
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface, and securely attach any peripherals you want to
use with the notebook (e.g. keyboard and mouse) to their ports.
2. When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the
battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter and
leave it there for 6 seconds or longer .
• Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked.
3. Use one hand to raise the lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees); use the other
hand to support the base of the computer ( Note : Never lift the computer by the lid/LCD).
4. Press the power button on the top of the computer for about 2 - 3 seconds to turn the computer “ on ” (note that the power
LED on the front of the computer will turn from orange to white when the computer powers on).
Figure 1 - 1 - Computer with AC/DC Adapter Plugged-In/Opening the Lid/LCD
135
°

Shutdown
Note that you should always
shut your computer down by
choosing the
Shut Down
command in Windows (see
page 1 - 33 ). This will help
prevent hard disk or system
problems.