MP-000022 - A
• The gas supply should not be restricted from the main meter to machine connection;
• Before turning the machine on, supply the water tank by filling it up to approximately 10 cm
from the bottom of the tray.
PLACE OF INSTALLATION
• The appliance should be installed 50mm clearances from other appliances & combustible
materials. Never obstruct the top, especially with furniture or any other material, as the
equipment will not function properly and there is a risk of fire;
• The appliance should be installed 50mm clearances from other appliances;
CAUTION: Do not use in outdoor locations. Do not install and use exposed to weather.
• For electrical installation and recommended a separate electric circuit with a 5A circuit
breaker exclusive to the unit;
• Always seek the assistance of a qualified professional.
APPLIANCE CONNECTION
• This appliance is supplied with castors and is to be connected to a fixed gas supply via a
flexible hose connection, a restraining chain or wire of adequate strength shall be fixed to the
appliance and be suitable to be fixed to the wall within 50mm of each connection point. The
length of the chain or wire shall not exceed 80% of the length of the hose assembly.
RELEVANT INFORMATION TO THE INSTALLER:
•
Reference picture on next page
to see where the chain/wire must be connect
• Unit is not supplied with chain/wire, neither a flexible gas hose, these parts must be
supplied by the professional installer.
INSTALLER: Installer needs to supply 3/4" non kink gas hose with fittings & safety chain with
suitable fixings to secure on wall & rear panel of appliance.
Содержание LVR 350A
