Operating Instructions Operator and control panel LT 45X
6
Date: 29.05.2020
9310330 BA / EN
3 Operation
3.1 Layout
The LT 45X control panel is intended for installation in a cabinet or wall.
2
1
2.1
2.2
2.6
2.7
1.1
1.5
1.7
1.6
1.2
1.3
1.4
1.8
2.3
2.4
2.5
Fig. 2
Layout of LT 45X control panel
1
Touch sensor
2
Displays
--
--
2.1
LED mains indicator (yellow):
The LED lights up when mains voltage is pre-
sent at the input of the vehicle mains supply
(also refer to the instruction manual for the
relevant EBL ... , Section ”Starting up”).
1.1
Main switch, 12 V ON/OFF:
For switching on and off the 12V supply of the
vehicle
2.2 Indicator LED (green):
Display: 12 V vehicle supply ON
1.2
Pump switch:
For switching on and off the 12V supply for
the water pump
2.3 Indicator LED (yellow):
Display: Pump supply ON
1.3
Light power:
For switching on and off the 12V supply for
the leisure area lighting
2.4 Indicator LED (yellow):
Display: Power for lighting ON
1.4
AUX supply:
For switching on and off the 12 V AUX supply
(e.g. for radio and TV)
2.5 Indicator LED (yellow):
Display: AUX power ON
1.5 Check of leisure area battery voltage
2 6
8 LEDs (2 red -- 2 yellow -- 4 green):
Display of battery voltage in 8 increments and
1.6 Check of starter battery voltage
2.6 Display of battery voltage in 8 increments and
warning of total discharge.
1.7 Check of water tank level
2 7
8 LEDs (blue):
Display of water and waste water tank levels
1.8 Check of waste water tank level
2.7 Display of water and waste water tank levels
(four increments).