Figure 17
Figure 15 (Aerial View)
10)
Use the opening angle of the gate to determine the correct installation dimensions (see also Figure 17)
11)
"C"
value is
139 mm
12)
"D"
can be easily measured
13)
"A" = "C" + "D"
14) The value "B" can be determined by means of "A" and the opening angle of the gate leaf.
Example: If "A" is 160 mm and the opening angle is 100°, then the distance "B" should be about 190 mm.
** Please make sure that the dimensions "B" and "A" on both sides are approximately equal or
as
close to
equal to ensure a smooth running of the
gate
leaves and to protect the
motors
.
9)
If the gate opens to the outside, leave a distance of 70 mm between the motor pivot point and
the mounting bracket.
Porte 300
Porte 300
Figure 16 (Aerial View)
Min
70 mm
10
