Operation Manual VISATRON® VN115/87plus EX
06/2016
Page 26
SCHALLER AUTOMATION
D-66440 Blieskastel / Saarland / Germany / Industriering 14 / P.O Box 1280
Industrielle Automationstechnik GmbH & Co. KG
Tel. +49(0)6842-508
-
0
/ Fax -260 / eMail: [email protected] / www.schaller.de
Figure 21:
Wiring diagram to connect Remote Indicator II
The monitoring device is the bus master and the OMD devices are the slaves. It's
necessary to adjust different bus addresses at each slave device. Normally the first
OMD device gets the address '1' and so on. The switch is on the rear side of the
measuring head (see
Figure 22: Bus address switch at the rear side of the measuring head
13 11
●
●
2 1
●
●
Terminator
Monitoring device
Address switch
