background image

Advanced Camera Control Functions

Instruction Manual SK1024U3HU 

  

 

SK1024U3HU_CameraContr

ol(4)_ByCommands.indd

20

Instruction Manual SK1024U3HU    © 2019-07 E

Advanced Camera Control Functions

4.1  Camera Control by Commands

In addition to user dialog inputs, the SkLineScan software also provides the option to adjust camera settings, such 
as gain, offset, trigger modes, by sending control commands directly.
Similarly, current parameters, as well as specific product information, can be read from the camera using the request  
commands. All set and request commands are listed in the tables below.

•  The commands are entered in the 'Input' field in the 'Camera Control' section of the "Camera Gain/Offset 

Control" user dialog, [Shift+F4].

•  In the 'Output' field, either the acknowledgement of the set commands (0 = OK, 1 = not OK) or the return values 

of the request commands are output.

The parameter settings are stored in the non-volatile flash memory of the camera and are available after a rapid 
start-up, even after a complete shut down or loss of power.

Gain/Offset Control dialog: Camera Control input and output in the right section

Содержание SK1024U3HU































Отзывы: