Camera Control and Performing a Scan
15
Instruction Manual
SK22368U3TOC
shar
ed_CameraContr
ol(2b)_ShadingCorr
ection_col.indd
Instruction Manual SK22368U3TOC © 2022-03 E
White Balancing by Individual Integration Time Control
In some circumstances, it is not possible to adjust the white
balance using the gain setting because of:
• dynamic limitations from a very intensive or weak illumination,
• undesired changes in noise level.
For such situations, an individual adjustment of integration times for the Red, Green, and Blue channels is
available, for a general description of the integration time adjustment, see section
adjustment, Integration Time (p. 17)
Check that the weakest color signal is higher
than about 70%. If necessary, adjust the
line frequency or the illumination intensity
accordingly.
Tick the box "Decoupling LF"
A
in the "Camera
Control" dialog.
Reduce the integration times for the two color
channels with the higher signals in order to align
the Red, Green and Blue channels to the same
level.
The Red channel is adjusted using the slider
"Exposure Time".
B
For the Green and Blue channels, enter the
exposure time into the respective boxes.
C
Color line signal with the Red signal adjusted to that of the Blue channel; the Green channel is still separate
Color line signal with balanced RGB curves
This approach is only available for
camera models providing
Integ‑
ration Control
function, see camera
.
A
B
C
