Sensor category
CCD Color Sensor
Sensor type
TCD2716DG
Pixel number
7456 x 3
Pixel size (width x height)
4.7 x 4.7 µm
2
Pixel spacing
4.7 µm
Line spacing, line sequence
18.8 µm, red (R) - green (G) - blue (B)
Active sensor length
35.04 mm
Anti-blooming
no
Integration control
no
Shading correction
yes
Line synchronization modes
Line Start, Exposure Start
Frame synchronization
yes
Pixel frequency
150 / 75 MHz
Maximum line frequency
6.41 kHz
Integration time
0.156 ... 20 ms
Dynamic range
1:1000 (rms)
Spectral range
350 ... 700 nm
Video signal
color 3*8 Bit digital
Interface
USB 3.0
Voltage
USB (800 mA)
Power consumption
4.0 W
Casing
Ø65 mm x 54 mm (Case type AT2)
Objective mount
M40x0.75
Flange focal length
19.5 mm
Weight
0.2 kg
Admissable casing temperature
+5 ... +45°C
Introduction
5
Instruction Manual
SK22368U3TOC
shar
ed_SystemRequir
ements_Specs_ML.indd
Instruction Manual SK22368U3TOC © 2022-03 E
1.3 Computer System Requirements
1.4 SK22368U3TOC Line Scan Camera - Specifications
The camera must be mounted thermally coupled
so that the acceptable casing temperature is not
exceeded during operation. Therefore applies to the
thermal resistance of the bracket or heat sink:
θ
amb
-
θ
casing
R
thHS
≤
P
camera
where
R
thHS
[K/W]
= thermal resistance of the bracket or heat
sink
θ
amb
[°C]
= ambient temperature
θ
casing
[°C]
= temperature of the camera casing (not
to be confused with the internal camera
temperature that is queried and output
with the request command I32)
P
camera
[W]
= camera power consumption
This camera is not USB 2.0 compatible. For operation with an USB 2.0 interface request for a factory-preset pixel frequency
limitation. This will reduce the data transfer rate as well as the power consumption to the USB 2.0 specifications.
• Intel Pentium Dual Core or AMD equivalent
• RAM min. 4 GB, depending on the size of acquired
images
• USB 3.0 interface. With a USB 2.0 interface, there
are limitations, see footer.
• High-performance video card, PCIe bus
• Operating Systems:
Windows 7 / 8.1 / 10 (64 or 32-bit) or
Linux kernel 3.13 or higher
