Operation
BASCP_EN
V08 | 08.2018
36
►
Swivel the NcFoamer 90° to the right and remove forwards away from the steam nozzle.
►
Position the new NcFoamer on the steam nozzle. Note the colour code (see description
above).
►
Swivel the new NcFoamer 90° to the left and engage in position.
►
Guide the milk hose with milk nozzle to the right out of the machine.
►
Close the service door
Option 1: Milk Smart
►
Have fresh, pre-cooled milk (3 – 5°C) ready.
►
Hang the hose or hoses into the milk.
The hose end must be in contact with the container floor.
Option 2: Side cooling unit
►
Open the door.
►
Check the cooling temperature shown on the display.
►
Remove and rinse the milk container.
►
Pour in fresh, pre-cooled milk (3 – 5°C).
►
Place the milk container into the cooling unit.
►
Hang the hose or hoses into the container.
The hose end must be in contact with the container floor.
►
Close the door.
Option 3: Under-machine cooling unit
►
Open the door.
►
Remove and rinse the milk container.
►
Pour in fresh, pre-cooled milk (3 – 5°C).
►
Place the milk container into the cooling unit.
►
Hang the hose into the container.
The hose end must be in contact with the container floor.
No more than 40 cm should be between the milk package and the beverage outlet.
See also "Safety notes" - "Hygiene" - "Milk".
Check the cooling temperature of 3 – 5°C regularly.
See also "Safety notes" - "Hygiene rules" - "Milk".
Ensure that the filled milk does not touch the closed milk container lid.
Ensure that the filled milk does not touch the closed milk container lid.
