BASCAP_TOUCHIT_EN
V04 | 10.2018
19
Product description
We reserve the right to make technical changes.
*
For special equipment, see serial plate. The values specified here apply to the standard
equipment.
** The A-weighted noise level (slow) and Lpa (impulse) at the workplace of the operating per-
sonnel is below 70 dB (A) for every operating mode.
Serial plate
There are two serial plates on the machine:
•
Behind the upper front cover, over the grounds container, inside the machine on the left.
•
Behind the left machine cover, next to the control board.
►
In the event of a fault or warranty claim, give the information on the serial plate.
EC Declaration of Conformity
Manufacturer's address
Applied standards
The aforementioned manufacturer declares herewith that this machine complies with all rele-
vant stipulations of the specified directives. In case of any modifications of the units that have
not been approved by Schaerer, this declaration is rendered invalid. The following harmonised
standards have been applied. For proper implementation of the requirements, a quality man-
agement system certified in 2008 by DEKRA Certification GmbH in accordance with SN EN
ISO 9001 is applied.
The manufacturer assumes sole responsibility for issuing this declaration of conformity. The
object of the declaration described above fulfils the requirements of directive 2011/65/EU of
the European Parliament and Council from June 8, 2011 for limiting the use of certain hazard-
ous substances in electric and electronic devices.
Manufacturer
Documentation specialist
Schaerer AG
P.O.Box 336
Allmendweg 8
CH-4528 Zuchwil, Switzerland
T +41 (0)32 681 62 00
F +41 (0)32 681 64 04
[email protected]
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O. Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
For CE conformity
Machinery Directive 2006/42/EC
EMC Directive 20014/30/EU
•
EN 60335-1: 2012
•
EN 60335-2-75: 2004
•
EN 62233: 2008
•
EN 55014-1: 2006
•
EN 55014-2: 1997
•
EN 61000-3-2: 2014
•
EN 61000-3-3: 2013
RoHS Directive 2011/65/EU
