SCEPTRE X42 HDTV User Manual
- 34 -
www.SCEPTRE.com
If You Want the Better Connection with Component…
1. Make sure the power of X42 LCD HDTV and your set-top box is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your set-
top box and Component 1’s green connector port off the back of your X42 LCD
HDTV.
3. Connect the blue color connector to both your set-top box and Component 1’s
blue connector port off the back of your X42 LCD HDTV.
4. Connect the red color connector to both your set-top box and Component 1’s red
connector port off the back of your X42 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your set-
top box and Component 1’s white connector port off the back of your X42 LCD
HDTV to the right side of your green, blue, red component connection.
6. Connect the red color connector to both your set-top box and Component 1’s red
connector port off the back of your X42 LCD HDTV to the right side of your green,
blue, red component connection.
7. Turn on the X42 LCD HDTV and your set-top box.
8. Use the remote control’s source button or the source button on the right side of
the TV to switch to YPbPr 1.
Please Note :
•
If Component 1 is already occupied, please use Component 2 as your
connection port and switch to source YPbPr 2.
•
Please reference the set-top box’s manual as well, to make sure the set-top box
is configured to output correctly to the TV.
•
Sceptre’s X42 LCD HDTV supports SONY’s universal remote code. Please
look up SONY’s codes in your universal remote’s hand book.
All manuals and user guides at all-guides.com
