SCEPTRE X42 HDTV User Manual
- 33 -
www.SCEPTRE.com
Connecting Your Satellite or Cable Set-
top box to the TV
If You Want the Best Connection with HDMI…
1. Make sure the power of X42 LCD HDTV and your set-top box is turned
off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the
other end to the HDMI port off the back of your X42 LCD HDTV.
3. Turn on the X42 LCD HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI 1.
Please Note :
•
Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
•
If HDMI 1 is already occupied, please use HDMI 2 as your
connection port and switch source to HDMI 2.
•
This TV does not decode Bitstream digital audio, therefore you’ll
need to make sure your DVD is setup for PCM digital audio
through HDMI.
•
Sceptre’s X42 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
All manuals and user guides at all-guides.com
