Scell-it Element S Split M5, Руководство пользователя

Страница: 5 / 42

4 •
ELEMENT SPLIT - User Manual ELEMENT SPLIT - User Manual
• 5
EN
FR
PL
CZ
• Screw the nut onto the mandrel automatically by exercising light pressure on the nut.
• Set the mandrel legth by adjusting the piece .
ADJUSTING THE TOOL
1- NUT POSITIONNING
2- ADJUSTING THE STROKE
The mandrel must come through the nut as indicated in the picture.
Then remove the nut before adjusting the stroke.
According to the nut and the support thickness the stroke must be
adjusted to provide ideal installation.
Adjusting of stroke is done by screwing/unscrewing the piece .
See graduations on the piece :
0 : minimum stroke 9 : maximum stroke
It is recommended to adjust the scale set on 2 and to do installation
trial.
Adjusting the stroke is necessary to obtain the desired deformation.
1 2 3 4
3
4
NO
A
YES NO
B C
A
B
C
Correctly set
Not fully set
Over-set. Do not pull the nut up
too tightly as you may strip the
thread in the nut or damage the
tool mandrel.
2
1
2
3
4
1