Scarlett SC-EK27G88, Инструкция по эксплуатации

Страница: 6 / 36

IM022
www.scarlett.ru SC-EK27G88 6

Before cleaning turn off the device and unplug it from the
socket. Let the device cool off completely (the heating element
remains hot for some time after use).

If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on

The manufacturer reserves the right to introduce minor changes into the product design
without prior notice, unless such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
BEFORE USING FOR THE FIRST TIME

Kettle is suitable for boiling water.

To remove the foreign smell from the new unit before the first use boil the water with added
juice of 1-3 lemons or a pack of citric acid.

Leave the fluid in the unit for 12 hours, then boil again.

Pour the solution out and rinse the kettle inside carefully avoiding fall water on the electric
contacts.

Repeat the procedure if necessary.
INSTRUCTION FOR USE
FILLING

Remove the kettle from the base unit.

You can fill the kettle with water via the spout or neck with opened lid.

Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from
operating dry and more than 1.8
l (up to “MAX” mark) to avoid overfilling and water spilling out
during the boiling.
SWITCHING ON

After filling with water, place the kettle on the base unit.

Connect the plug to the power supply and push On/Off switch. The appliance will turn on and
indicator will light.
SWITCHING OFF

When water begins to boil, the kettle will switch off automatically and indicator light will go off.

NOTE: This appliance has a safety system, which automatically switches heating element off
if the appliance inadvertently has been switched on when empty, or if it operates dry. In this
case let the appliance cool down 10 minutes before filling with water again.
SWITCHING ON AGAIN

If the kettle has been switched off automatically, it can be switched on again after cooling for
15-20 seconds.
CARE AND CLEANING

Open the lid and pour out the water through the orifice.

Always remove the plug from the socket and let the appliance cool down completely.

Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry
cloth. Do not use any abrasive materials.

Remove scale regularly, using special descaling agents, available at the market, following
given instructions.
STORAGE

Switch off and unplug the appliance; let it entirely cool.

Complete all requirements of Chapter CLEANING AND CARE.

The cord can be wrapped around the base area for storage.

Keep the appliance in a dry cool place.