Scarlett comfort SC-FH53012, Инструкция по эксплуатации

Страница: 3 / 8

IM017
www.scarlett.ru SC-FH53012 3
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before use and keep in a safe place for future reference.

Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in
your home.

For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this
instruction manual.

Do not use outdoors.

Always unplug the appliance from the power supply before cleaning and when not in use.

To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it has happened DO
NOT TOUCH the appliance, unplug it immediately and check in service center.

Do not use the appliance in immediate proximity to
а bath, а shower or а swimming pool.

Do not place appliance or parts near an open flame, cooking or other heating appliances.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do not leave the appliance switched on when not in use.

Do not operate after malfunction or cord damage.

Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest
service center only.

Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around appliance.

Never insert fingers, pencils or any other object through the guard when the appliance is operating.

To reduce the risks of electric shock do not switch the appliance by wet hands.

For repair or accessories, contact an authorized service center only.

Operating unit should be not closer than 0.9 m to flammable or easy deformable under high temperature objects.

When the appliance is on, move it away from the wall socket and make sure that the cord is not in front of the air outlet grill.

If, however, the airflow is inadvertently obstructed during use, the built-in thermal safety cutout will automatically switch off the
appliance.
CAUTION:

Do not cover the appliance when it is in use.

Do not use the fan heater in rooms less than 4 m
2
area.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2
hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such
changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
OPERATION

Set the thermostat to minimum position.

Set the mode switch to minimum position .

Insert the plug to the power supply.
MODE CONTROL

Set the mode switch to the required position:
–
– Off;
–
– Fan (airflow without heat);
–
I
– Warm airflow (1000 W);
–
II
– Hot airflow (2000 W).

The indicator light should light up, when you set the thermostat to any position except off.
THERMOSTAT

If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to arise the
temperature and counterclockwise to lower it.

When the ambient temperature raises to satisfying level, slowly turn the thermostat counterclockwise until the fan heater will
switch off. The room temperature thus will be kept at the set level.
NOTES:

The room must be closed, if not, using of fan heater will not make good result because of heat leakage.
CARE AND CLEANING

The appliance should be cleaned regularly, otherwise the efficiency of heating may be reduced.

Always unplug the appliance and allow it to cool down before cleaning.

Wipe the outer surface of appliance with a soft damp cloth.

Do not use abrasive cleaners, gasoline, thinner or other chemicals to clean the appliance.
STORAGE

Complete all requirements of chapter CARE AND CLEANING

Keep the appliance in a cool, dry place.