19
11.2 POSITIONING BELT BED
A bed locking hex socket head screw locks the belt
bed in a vertical or horizontal position.
To adjust vertical position:
1. Remove the work support.
2. Loosen the hex socket head locking screw
using a 6mm hex wrench.
3. Position belt bed vertically as shown and tighten
the hex socket head screw.
11.3 SURFACE SANDING ON THE SANDING BELT
Warning:
To avoid injury from slips, jams or
thrown pleces, adjust the backstop to clear the
sanding surface by no more than 1/16 of an
inch. When checking clearance between the
belt and work support, press the belt flat
against the metal beneath it.
Hold the workpiece firmly with both hands,
keeping fingers away from the sanding belt.
Keep the end butted against the backstop and
move the work evenly across the sanding belt.
Use extra caution when sanding very thin
pieces.
For sanding long pieces, remove the work
support.
Apply only enough pressure to allow sanding belt to remove material.
Содержание 48
Страница 24: ...24 14 REPAIR PARTS ...
