Scantool 48, Руководство пользователя

Страница: 25 / 26

25
15. REPAIR PARTS
Key
No
.
Description
Key
No
.
Description
1 Knob 35 Table
2 Washer, Rubber 36 Support, Table
3 Washer, Notched 37 Lable, Scale
4 Bed 38 Cord w/plug
5 Screw, flat cross M5 x 0.8-35 39 Motor (1/3 HP)
6 Screw, Hex M6 x 1.0-14 40 Connector, wire
7 Lockwasher, Ext. M6 41 Nut, Hex M6 x 1.0
8 Washer, 6.5 x 17.8 x 1.6 42 Base
9 Support, Work 43 Belt, Timing drive
10 Belt, Sanding 4” x 36” 44 Screw, flat cross M5 x 0.8-10
11 Lockwasher, Helical M5 45 Washer, countersink
12 Screw, Pan Hd M5 x 0.8-8 46 Pulley, drive
13 Drum, Drive 47 Screw, pan Hd. M6 x 1.0-25
14 Screw, socket set, M8 x 1.25-10 48 Washer, M6 x 12 x 1.6
15 Cap, Bearing 49 Pulley, Drive
16 Bearing w/Felt Washer 50 Screw, flat Hd. M5 x 0.8-25
17 Spacer, Bearing 51 Support, Bearing
18 Housing switch 52 Cover, Belt
19 Lockwasher, Ext. M5 53 Support, Bed
20 Screw, Pan Hd. M5 x 0.8-16 54 Nut, square M8 x 1.25
21 Key, switch 55 Bumper, Rubber
22 Switch, Locking 56 Screw, Hex soc. CapM8 x 1.25-25
23 Lead 57 Bearing, Ball
24 Screw, pan cross –
Type “AB”M4.2 x1.4-30 58 Ring, Retaining M12
25 Cover, Switch Box 59 Shaft, Drive
26 Relay 60 Nut, Hex Flange M5 x 0.8
27 Pad, 6” Sandpaper 61 Spacer, Guide
28 Screw, Pan cross M6 x 1.0-12 62 Spring, Index
29 Lockwasher, Hilcal M6 63 Guide, Drum
30 Disc 64 Shaft, Idler
31 Screw, Pan Hd
Type “AB” m4.2 x 1.4-12 65 Drum, Idler
32 Guard, Disc 66 Lever, Tension
33 Shroud, Disc 67 Spring, Tension
34 Collector, Dust 68 Spacer, Lever
69 Washer, M5 x 15 x 1.2
_ Owner´s Manual(Not Illus.)