Scanstrut Ltd. 1 Malt Mill, Totnes, Devon, UK TQ9 5NH
Tel:
+44(0)1803 863800
Fax:
+44(0)1803 862223
e-mail:
website:
www.scanstrut.com
Nav Light, GPS & VHF Antenna Mount Extensions
Installation Instructions
Please note that the EXT-LED comes with Hella NaviLED 360 all round white light pre-fitted and hard wired
with 1.45m of cable.
Fitting EXT-LIGHT and EXT-LED
Note: Steps 1 and 2 for EXT-LIGHT only
.
1.
EXT-LIGHT is pre-drilled to fit Perko 200, Aqua Signal 25 & 45 series and Hella
Marine 2984 Series lights.
2.
Fit light to top mount plate as per mounting instructions for your light. The cable
should be routed down through the EXT-LIGHT.
3.
Thread the cable of the light down through the top of the EXT-LIGHT, then down
through the SC111/2 and out of the slot on the underside of the tube.
4.
Screw EXT-LIGHT/LED onto the threaded boss at the top of your SC111/2.
5.
Continue with installation as per SC111/2 instructions.
Fitting EXT-GPS
EXT-GPS is designed for the installation of GPS antenna that has the standard 1” x 14TPI
thread as their fixing. It elevates the antenna 300mm above the standard SC111 and SC112
for maximum performance where required.
1.
Thread the cable of your antenna down through the threaded boss at the top of the EXT-
GPS, then down through the SC111/2 and out of the slot on the underside of the tube.
2.
Attach your antenna to the threaded boss at the top of the EXT-GPS.
3.
Continue with installation as per SC111/2 instructions.