Scanna Msc SCANMAX 25 C, Руководство по эксплуатации и техническому обслуживанию

Страница: 3 / 30

WARNING NOTICE
Safety precautions for use and operation of x-ray producing equipment
X-RAY PRODUCING EQUIPMENT CAN BE DANGEROUS TO BOTH THE OPERATOR AND
PERSONS WITHIN THE IMMEDIATE VICINITY UNLESS SAFETY PRECAUTIONS ARE
STRICTLY OBSERVED.
Exposure to excessive quantities of X-radiation may be dangerous to health. Users must avoid exposing
any parts of their person, not only to the direct beam, but also to secondary or scattered radiation that
occurs when an x-ray beam strikes or has passed through any material.
The X-ray producing equipment is installed in a cabinet providing appropriate radiation shielding, the user
should be aware that the useful beam can constitute a distinct hazard if not employed in strict accordance
with instructions contemplated to provide maximum safety for the operator.
Also, the electrical circuits, although enclosed for the protection of the operators, must be considered as a
potential hazard calling for strict observance of safety practices pertaining to operation and maintenance.
Proper electrical grounding must always be used.
Before using the equipment all persons designated or authorised to operate the equipment, or supervise its
operation, must have a full understanding of its nature and become familiar with established safe exposure
factors by a careful study of the National Bureau of Standards Handbook “ X-ray Protection” HB93,
pertaining to X-ray protection.