SCANMASKIN Scan Combiflex 1000 RC, Руководство пользователя

Страница: 27 / 57

Scan Combiflex 1000 – User Guide
Chapter 4
- 23 -
SCANMASKIN
SW
ED
EN
A
B
MACHINES-MINERALS-KNOW-HOW
4.5.7.3 Mode light
Mode light (5) Description
Green
Normal speed
Amber Slow speed
Flashing red
Fault
Table 4-5 Mode light
4.5.7.4 Start up
Press the joystick power on button (2) once. If the joystick is not centered when starting up a fault
will be indicated – if this occurs, turn off and on the joystick again.
4.5.7.5 Speed modes
The joystick has got two speed modes which also applies to the remote control. During normal
operation the mode light should be green.
4.5.8
Assisted drive
 Make sure that the joystick (1) is on according to “
4.5.7.4 Start up
”.

Select proper speed mode according to “
4.5.7.5 Speed modes” .

Move the joystick (1) in the direction you want to drive the machine.
4.6
Operation from remote control
4.6.1
Selecting remote control
 Set the “0
1” switch (4) to “1” on the control panel.

Restart the joystick according to “ 4.5.7.4 Start up
”.
 Set the drive mode selector (9) to “N” (neutral). 6

Turn on the remote control by pulling up the emergency stop (6) on the remote control.

Wait a few seconds.

Press the connection button (3) once.
If the connection is lost, use the connection button (3) to reconnect.
6
Note: The remote control will only start when the drive mode selector is at neutral.