SCANMASKIN Scan Combiflex 1000 RC, Руководство пользователя

Страница: 20 / 57

Scan Combiflex 1000 – User Guide
Chapter 3
- 16 -
SCANMASKIN
SW
ED
EN
A
B
MACHINES-MINERALS-KNOW-HOW

Attach the drive locking plate (1) so that the two
wedges are on the outside.

Attach the washer (2) and tighten the screw (3).
How to lock the wheels

Unscrew the screw (3) and remove the washer (2).

Remove the drive locking plate (1).

Align the square axis so that the drive locking plate (1) will fit.

Attach the drive locking plate (1) so that the two wedges fits into the slots in the wheel.

Attach the washer (2) and tighten the screw (3).
Crush hazard – be careful when aligning the wheel axis using the joystick. Make sure the
machine is on a levelled surface before working on the wheels.
3.3 Assisted transport - Joystick
 Make sure that the joystick is on according to “
4.5.7.4 Start up
”.
 Select proper speed mode according to “
4.5.7.5 Speed modes” .

Move the joystick in the direction you want to drive the machine.
3.4
Assisted transport - Remote control
3.4.1
Manually
 Make sure that the wheels are locked. See “
3.2.1 Locking/Unlocking of motor drive
”.

Make sure that the joystick is on according to “ 4.5.7.4 Start up
”.
 Select proper speed mode according to “
4.5.7.5 Speed modes” .

Set the drive mode selector to “N” (neutral).
5

Move the joystick on the remote control in the direction you want to drive the machine.
3.4.2
Automatic
 Make sure that the wheels are locked. See “
3.2.1 Locking/Unlocking of motor drive
”.

Make sure that the joystick is on according to “ 4.5.7.4 Start up
”.
 Select proper speed mode according to “
4.5.7.5 Speed modes” .

Turn the “TRACKING” knob to its centre position.
 Set the drive mode selector to “FORWARD” or “BACKWARD”
 Use the “FORWARD SPEED” knob to adjust the drive speed and the “TRACKING” knob to
adjust the drive direction.
3.4.2.1 Stop automatic drive
 Set the drive mode selector to “N” (neutral).
5
Note: The remote control will only start when the drive mode selector is at neutral.