SCANMASKIN Scan Combiflex 1000 RC, Руководство пользователя

Страница: 10 / 57

Scan Combiflex 1000 – User Guide
Chapter 1
- 6 -
SCANMASKIN
SW
ED
EN
A
B
MACHINES-MINERALS-KNOW-HOW
1.5 Range of application
SC-1000 is exclusively designed to process horizontal surfaces. SC-1000 must not be used
for other purposes than stated in this user guide. The manufacturer will not be liable
for damage or injury resulting from incorrect usage of SC-1000. Failure to follow the
directions in this user guide will void the warranty.
Typical applications
Removal of old coatings, carpets, putty from hard surfaces
Removal of undulated concrete surfaces
Preparation of the surface for coatings
Polishing of the surface
Removal of coating defects
Removal of glue residues
1.6
Scope of supply
The following parts are included with the standard SC-1000 grinding machine:
Two keys for main switch
Key to electrical cabinet
Remote control
Two batteries for the remote control
Battery holder for the remote control
Battery charger for the remote control
User guide
If the machine has got a water connection, the counter part for the connection will be included and
fit in the water connection near the handle
.
Machines sold outside of Europe will be either equipped with a local standard connector for the
power inlet or the mating connector will be included and fitted at the main power inlet.
Read “2.6
Electrical safety” before connecting any included connectors .