#SC 40RT 06 – 101027
Page 15 of 44
7.4. Closing Down
When the cleaning operation is fi nalized the following should be done.
1. Depending on the type of cleaning that is being performed and the type
of cleaning solution used, a procedure for after use fl ushing of the cleaning
system should be developed for your application. In general, a fresh water
fl ush is recommended after each cleaning.
2. Close the main valve, which will end the cleaning and stop the drive unit.
3. Open the cofferdam plug (A) and inspect for leakage.
4. Disconnect the hose and remount the dust cap.
A
Designer
Date
Date
Drawer
Surface treatment
Weight
Note
Dimension
Material
General Tolerances
Tolerance ISO 2768-m
Gen. surface
N9
This document is our property and shall not without our permission in writing be altered, copied, used for manu- facturing or communicated to any person or company.
Drawing no. / Ritningsnr.
Format
SC40RT
A4
Scale
SC40RT
1:5
SC40RT
Denna handling är vår egendom och får ej utan vårt skriftliga medgivande ändras, kopieras, användas för tillverkning eller delges annan person eller firma.
SS-ISO 2768-m for machined parts
(30)-120=
0.3
0.5-3=
0.1 (120)-315=
0.5
(3)-30=
0.2 315)-1000=
0.8
P03.1
Törnedalsgatan 1, 275 21 Sjöbo
SWEDEN
ML
Revision
05-04-19
E
No.
Revision note
Date
Sign.
Qty.
Ins.
SC40RT
gram
NOTE!
Watch hands and eyes when removing the cofferdam plug
in case of leakage, use protection goggles and gloves.
Designer
Date
Date
Drawer
Surface treatment
Weight
Note
Dimension
Material
General Tolerances
Tolerance ISO 2768-m
Gen. surface
N9
This document is our property and shall not without our permission in writing be altered, copied, used for manu- facturing or communicated to any person or company.
Drawing no. / Ritningsnr.
Format
SC40RT
A4
Scale
SC40RT
1:5
SC40RT
Denna handling är vår egendom och får ej utan vårt skriftliga medgivande ändras, kopieras, användas för tillverkning eller delges annan person eller firma.
SS-ISO 2768-m for machined parts
(30)-120=
0.3
0.5-3=
0.1 (120)-315=
0.5
(3)-30=
0.2 315)-1000=
0.8
P03.1
Törnedalsgatan 1, 275 21 Sjöbo
SWEDEN
ML
Revision
05-04-19
E
No.
Revision note
Date
Sign.
Qty.
Ins.
SC40RT
gram
