Scanivalve DSA 3000 Series, Инструкция по эксплуатации и обслуживанию

Страница: 6 / 43

Power Requirements
DSA 3017/3217 20 to 36 Vdc @ 8W
DSA 3018/3218 No Heater 22 to 36 Vdc @ 8W (Nominal 28Vdc).
With Heater 22 to 36 Vdc @ 35W (Nominal 28Vdc). Power
requirements will drop to 8 W after the module
has reached temperature.
Maximum Reference Pressure 250 psid (1725 kPa) or sensor overpressure, whichever is less
Media Compatibility Gases compatible with silicon, silicone, aluminum, and stainless
steel
Communications Protocol Ethernet IEEE 802.3
Typical Data Acquisition Rate
DSA3000 Series 45 sample/channel/sec TCP/IP ASCII (Engineering Units)
DSA3200 Series 200 samples/channel/sec TCP/IP ASCII (Engineering Units)
500 samples/channel/sec UDP Binary
Typical Communications Rate
Ethernet 10 Mbits/sec
RS232 DSA3000 Series - 1200 to 19200 BAUD (Back Door)
DSA3200 Series - 1200 to 19200 BAUD (Configuration Only)
Weight
DSA3017/3217 6.4lbs (2.91kg)
DSA3018/3218 9.78 lbs (4.45kg)
Dimensions (LxWxH)
DSA3017/3217 7.08in (178.3mm) X 2.86in(72.6mm) X 3.40in(86.4mm)
DSA3018/3218 9.0 in (228.6mm) X 4.08 in(103.6mm) X 6.97in(177mm)
Operating Temp
DSA 3017/3217 0 to 60
E
C
DSA 3018/3218 Without Heater - 0 to 60
E
C
With Heater - -55 to 60
E
C
Cooling Kit available for operation above 55
E
C
Compensated Range
DSA3000 Series 0 to 59
E
C
DSA3200 Series 0 to 69
E
C
Total Thermal Error Less than ±0.001% FS
2