39
Follow the instructions on the Bluetooth device for pairing. If necessary, use the
PIN code ”1234”.
A message is shown when pairing is complete.
Note
If another Bluetooth device was connected to the system earlier then the
device will now be disconnected.
If the Bluetooth connection fails then you must repeat the pairing or read
the manual for the Bluetooth device.
If the Bluetooth connection fails then you can remove already paired
Bluetooth devices, see the chapter ”Telephone”, subchapter ”General
Information” section ”Disconnecting a paired device”. Then repeat the
pairing.
Use
Preconditions
The following conditions must be fulfilled in order for it to be possible to use the
system’s Bluetooth music mode:
The system’s Bluetooth function must be activated.
The Bluetooth function on the external Bluetooth audio source must be activated
(see the manual for the device).
Depending on the external Bluetooth audio source, it may be necessary to set the
device as ”visible” (see the manual for the device).
The external Bluetooth audio source must be paired with and connected to the
system.
Activating Bluetooth music mode
Press the
MEDIA (16)
button once or repeatedly in order to activate the Bluetooth
music mode.
You can now control the external audio source via the system.
Tap on .
The audio is played back.
To play back the next audio track,
Press the (1) button.
To pause or stop audio playback,
tap on the
button. To start playback again, tap on once again.
