Product Description
•
Rechargeable Ultra High Power LED Work Light.
•
Waterproof and shock proof for use in all kinds of complex environment.
•
Advanced high power LED binding technology with a lifespan up to 100,000 hours.
•
Patented induction charging design. Eradicates charging problems caused by short circuits, oxidation, dirty con-
tacts etc.
•
Intelligent circuit design with brightness adjustment, overcurrent, overvoltage, overcharge and overdischarge pro-
tection.
•
Projects a warm white and very intense light.
•
Illumination is more than three times brighter than traditional LED inspection lights.
•
Illuminates an area four times wider than traditional LED inspection lights by diffusing the light in an 80° arc.
Specifications
Article no.:
03.5002
Operating time (main light):
Up to 3 hours
Operating time (spot light):
Up to 8-10 hours
Charging time:
3 - 4 hours
Battery charger operating voltage:
230V AC / 50Hz
Battery specification:
3.7V / 2400 mAh Li-Polymer
LED intensity @ 50cm (main light):
500 lux
LED intensity @ 50cm (spot light):
1200 lux
Operating temperature range:
-10 to +40°C
Ingress Protection:
IP68
Dimensions – work light (D x L):
Ø55 x 280 mm
Dimensions – charging base (H x W x D):
107 x 95 x 110 mm
Weight – work light:
0.32 kg
Weight – charging base:
0.22 kg
Warning
Working safely with this lamp is possible only when the operating and safety information
are read completely and the instructions contained therein are strictly followed.
•
Avoid looking directly into the beam, as it will dazzle.
•
Don’t use the lamp near open flames.
•
In order to extend the battery lifespan, don’t overdischarge the battery.
•
If lamp will be stored for one month or more, please fully charge it prior to storage.
•
Replace battery with same standard.
Battery Treatment / Charging Instruction
•
Charge the battery for more than 10 hours before first use
•
Recharge the battery when main LEDs blink.
•
Red indicator will turn on while battery is flat. At this stage please recharge to protect the battery.
•
Red indicator on: charging
•
Red indicator off: charging completed
•
Don’t leave battery flat. Otherwise it could be overdischarged and may NOT be able to be reused.
•
When you don’t use the work light for a long time, recharge in every 30 days.
•
When you put the lamp into the charger and the red indicator begins to blink, it means the charger is reactivating
the batteries. This process would take around 0.5 to 3 hours and then the indicator turns into constant red for nor-
mal charging.
•
If the red indicator still blinks after 3 hours, please unplug and try again.
•
If the battery still can’t be recharged normally, replace the battery.
SUN
