PROBLEM
POSSIBLE CAUSE(S)
SOLUTION
Appliance does not work.
Appliance is not switched on.
Switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective.
Check fuse,replace if necessary.
Socket is defective.
Mains malfunctions are to be corrected by an
electrician.
Appliance cools too much. Temperature is set too cold.
Turn the temperature regulator to a warmer
setting temporarily.
The food is too warm.
Temperature is not properly ad-
justed.
Please refer
to the “Control panel” section.
Door was open for an extended
period.
Open the door only as long as necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
Turn the temperature regulation to a colder
setting temporarily.
The appliance is near a heat
source.
Please look in the “Installing your new appli-
ance” section.
Interior LED Light does not
work.
LED Light is defective.
Please look in the “cleaning and care” sec-
tion.
Heavy build-up of frost,
possibly also on the door
seal.
Door seal is not air-tight (possibly
after reversing the door).
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool setting).
At the same time shape the warmed door
seal by hand such that it sits correctly.
Unusual noises.
Appliance is not level.
Readjust the feet.
The appliance is touching the wall
or other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall.
If necessary, carefully bend the component
out of the way.
The compressor does not
start immediately after
changing the temperature
setting.
This is normal, no error has oc-
curred.
The compressor starts after a period of time.
Water on the floor or stor-
age shelves.
Water drain hole is blocked.
See the “cleaning and care” section.
