Scandomestic BIK 343W, Руководство пользователя

Страница: 28 / 64

INSTALLATION GUIDE
This appliance must never be installed close to heat sources,
e.g., heating elements or cookers, nor in damp places.
Seek the help of another individual, or two, when installing
this appliance. This appliance may have sharp edges. Wear
adequate PPE for the task and environment.
To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
The cooling system at the rear of the appliance must not
touch the rear wall.
The greater the gap, the better.
Before the installation, you should provide the inner dimen-
sion of your cabinet to your supplier and see whether your
product can be installed into your cabinet or not.
CHANGE THE OPENING DIRECTION OF
YOUR PRODUCT 1/3
To reverse the door you will need to tilt the appliance back-
ward to access the lower hinge which holds screws. Do not tilt
the appliance more than 45 degrees and do not lay the appli-
ance flat on its side.
For your own safety, a minimum of 2 people should lift or tilt
this product.
Tools Required: Torx headed screwdriver, flat headed screw-
driver and hexagonal spanner or a socket driver.
1. Unscrew the 2 screws from the upper hinge and re-
move the fridge door by carefully lifting it up and
away from the appliance. Do not fix the hinge to the
opposite side.
2. Unscrew the 2 screws from the lower hinge and re-
move the hinge. Do not fix the hinge to the opposite
side at this stage.
CHANGE THE OPENING DIRECTION OF
YOUR PRODUCT 2/3
3. Remove all of the screw cap covers on the opposite
side of the appliance from where the hinges have
just been removed. Remove the hinge plugs on the
top and bottom of the door and fix them to the op-
posite side.
4. Flip over the upper hinge 180°(so the pin is pointing
upwards) and fix on to the opposite side at the bot-
tom of the appliance. Place the door back on to the
lower hinge.