scandia Verdant LE, Руководство пользователя, Страница: 11 / 28

1. INSTALLATION OF DISPLAY
Unpack control panel and fix with screws at the top rear of stove.
2. BEFORE OPERATION
Before igniting please check burn pot, pellet grate and ash box are aligned in proper position.
OPERATING INSTRUCTIONS
3. OPERATING THE HEATER
WARNING
Only operate this appliance if it has been installed by a licensed installer.
Never operate the heatert with the door open.
INITIALISATION
Ensure the burn pot and underside are clean before the stove is started.
SET TEMP
R T °C
TIME ON
TIME OFF
HEAT
TIMER
FIRE
LONG
TIMING
SHORT
TIMING WORKING
MODE
DEVICE
SETTING
9
NOTE: A slight smell may be apparent for the first few hours of use. This is due to the heat resistant paint curing.
It is recommended to open windows and doors for the first lighting
.
1.
Ensure power is connected to the heater
2.
Turn on the red switch at the back of the heater.
The display will illuminate.
•
At this point the system will enter self-inspection procedures and display
error codes if any errors are detected.
(A list of error codes can be found in the trouble shooting section of this
manual).
•
Leave this switch on during periods of use. It can be turned off during
warmer months and on holidays.
3.
Fill the hopper with wood pellets.