1
- Read and follow all the instructions before assembling your Barrel Sauna.
- The assembly must be done by two people at minimum.
- Avoid using force as to not strip the wood.
- The installation ground must be level, dry and clean.
- Keep this document for any future questions or issues.
- You will need the below tools:
- Rubber mallet
- Drill
- Level
- Adjustable wrench
- Locking pliers
Congratulations on purchasing one of the finest home sauna units available. We appreciate your order
and hope you enjoy your sauna. Follow this guide to assemble your sauna correctly and for instructions
on how to use the various components.
Please feel free to reach out to us with any questions or problems, and we will do our best to assist you.
Scandia Manufacturing Team: 1+(877)467-2862
Recommendations before assembly:
Dear Valued Customer:
Recommendations after assembly:
- Try to minimize moving the Barrel Sauna after assembly.
- Do not operate the Barrel Sauna under the influence of alcohol or any mind altering substance.
- Children must be accompanied by an adult at all times inside the sauna.
- Do not touch the sauna heater.
- Do not turn on the heater until the sauna is assembled.
- Do not exceed the maximum recommended number of people inside the sauna.
- Before maintenance or cleaning ensure the sauna heater is off.
- Use Scandia Sauna Oil to protect surfaces from wear and tear.
- Do not use abrasive cleaners, flammable products, steel wool, or any other cleaner that compromises the integrity of
the wood. Scandia Manufacturing recommends a combination of 4 parts water to 1 part apple cider vinegar as a
cleaning product.
- Do not spray down the sauna with a hose or power washer.
- Do not stand or jump on the benches.
- Do not sit on benches before assembly is complete.
Disclaimers:
- Scandia Manufacturing is not responsible for any damage or injury caused by misuse or mis-installation of the
Barrel Sauna.
- Scandia Manufacturing is not responsible for the modifications and applications made by the consumer to the
Barrel Sauna.
WARNING! Electrical Hazard
- Every electrical adjustment done during the installation has to be done by a certified
electrician. Improper manipulation of AC power could cause damage to your electrical
installation and will cause very serious injuries to an unexperienced installer.
- Before starting the installation, make sure you have 220v single phase available and a
NEMA 10--30R wall plug, the electrical wiring has to be done with a wire gauged between
10 AWG – 4 AWG and properly grounded.
- Do not modify the electric or gas heater, the J-Box, the wiring, or any part of the electrical
installation.