scandia AVEDUR SCGAS10, Руководство пользователя

Страница: 24 / 31

STEP 9
Remove all screws and carefully lift the
component access panel to view the
components
STEP 10
Using two spanners remove the flexible gas hose from the burner assembly. This will
allow you to take the access panel out of the firebox. After removing the panel you will
be able to access the components for adjustments/alterations, routine maintenance or
for any other servicing tasks.
STEP 8
Disengage the spark and the flame wiring
from the SIT ignition module and remove
the pilot assembly from the firebox.
STEP 5
Ensure that any media has been removed
from the burner. To remove the burner
from the firebox, remove 6 screws as
shown in the image below.
STEP 6
STEP 7
Using a spanner, remove the nut to access
the pilot injector.
Remove two screws and carefully remove
the pilot burner assembly.
STEP 4
Ensure that any media has been removed
from the tray. Carefully remove media tray
from the firebox.
STEP 3
To remove the reflective panels at the back
of the firebox, remove all 5 screws. After
removing the back panels, slide side panel
out of the firebox.
23.
HEATER MAINTENANCE
COMPONENT ACCESS
...continued