Adjustment of the handle
The handle can be loosened and adjusted at the
lower closing hook with a hexagon spanner.
Accessories
For this model you can have the following accessories:
Handle
The handle is elegantly integrated on the moulding
below the door. Pull out the handle to open.
Self-closing door (BA 1)
The door is prepared with a self-closing function at the factory.
If you tighten the spring with the hexagon spanner, the door
will close automatically when you let go of it.
• Special elbow with wall sleeve and cover ring
for SCAN 46 with revolving base (see separate
instructions)
• Special adaptor for steel chimney for SCAN 46
with revolving base (see separate instructions)
SCAN 46
SCAN 46 with revolving base
Mounting with elbow:
See separate instructions delivered with the stove.
Mounting with direct connection to steel chimney:
Should only be done in accordance with the instructions from
an authorised SCAN dealer. See separate instructions delive-
red with the stove.
The warranty is invalid if the above is not followed.
Please do not forget to remove the foil
before the first firing!
Data for calculation of the chimney
Stove
model
SCAN
Connecting
adaptor
mm
1
Density of
flue gas
flow
g/s
2
Flue gas
tempera-
ture
oC
3
Minimum
draft
Pa
4
Density of
flue gas
flow
g/s
5
Flue gas
temperature
oC
6
Minimum
draft
Pa
7
0,8
Minimum
draft
Pa
46
150
-
-
-
5
310
14
11
With closed doors
With open doors
Column 2 and 5 show the flue gas temperature in the connecting adaptor
Column 3 and 6 show the lowest/minimum draft in Pa by rated value
Column 7 shows the lowest/minimum draft in Pa by 0.8 x rated value
