SO-111-R/RF Ophthalmic Microscope
User Manual
Page 7 of 22
Issue number 1.0 X:\Current User Manuals\SO-111-R-RF User Manual v1.0.doc
MOUNTING TO THE SO-331 FLOOR STAND
1.
Carefully lift the floor stand base out of the carton using the handles that are fixed to the
top. The floor stand base is extremely heavy and should only ever be lifted with the
assistance of another person. Place the floor stand base on the floor. Remove the pillar from
the carton and place it in the floor stand base. Tighten the two grub screws using the 5mm
socket key found in the tool kit to fix the pillar assembly in place.
2.
To fix the floor stand base, screw the knobs down until the stops are resting evenly on the
floor, then screw the knurled discs down on to the floor stand base to lock the stops. To
unlock the floor stand, screw the knurled discs back up, and then unscrew the knobs until
the wheels can move freely.
3.
Place the pillar fitting/power supply assembly on the pillar and tighten the two grub screws
to fix the assembly in place.
4.
Continue assembling the microscope from step 2 of the instructions for table mounting.
Figure 3: Assembling the SO-111-RF Microscope
