q
u
t
i
no/YES
i
dEFAU
ENTER
q
7.2 (“dEFAU”) Reset
Default Settings
7.3 (“DIG’L”) Digital
Select digital mode
Safe Mode
Upon track overload or short circuit, the power base is protected with
an automatic power cut-off within the power base circuitry. This is
indicated by flashing lights on the power base and ‘SAFE’ displayed
on the screen.
After the track overload or short circuit condition is cleared, press
and release the ENTER button to release the system from
SAFE mode and return to the previous operation screen.
ENTER
q
i
DIG’L
PLAtF
12
13
Set Car ID
1
Place car on the track
2
Press/hold Enter –
Green LED flashes
3
Push brake button –
Red & Green LED flash
Repeat process one
car on track at a
time per controller
RESET DEFAULT SETTINGS
BASE UNIT ONLY
To use base unit without LCD allows you to race 6 cars
ENGLISH
ENGLISH
6_car_powerbase_instructions:Layout 1 26/01/2010 11:48 Page 12
