manualshive.com logo in svg

Scag Power Equipment Liberty Z SZL48-22KT, Руководство оператора, Страница: 15 / 60

Поделиться
Скачать
Scag Power Equipment Liberty Z SZL48-22KT Скачать руководство пользователя страница 15

11

R

Section 3

CUTTER DECK

3.4 

Type ......................... Floating, Adjustable, Anti-Scalping, Hybrid Design Combines Out-Front and Belly-Mount Designs
Construction ...............................................................................10-Gauge top with 11-Gauge reinforcement throughout
 

the spindle area, 10-Gauge skirt for strength and longevity

True Cutting Width:

48 ..........................................................................................................................................................48" (122.0 cm)
52 ..........................................................................................................................................................52" (132.0 cm)

Cutting Height Adjustment ...........Foot-Operated Lever Adjustment from Operator's Seat, 1.5" to 4.5" in 1/4"increments
Cutter Blades ............................................................................. 0.197 in. Thick, Milled Edge, Wear Resistant Marbain™
Blade Engagement ............................................................Electric Blade Engagement Clutch with Control Panel Switch
 

Connected to the Cutter Deck through a Belt.

Discharge Opening ............................................... Extra Wide Discharge Opening with Spring-Loaded Discharge Chute
Discharge Chute ...................................................................................................Black, Polypropylene (Plastic), Flexible
Spindles ...........................Heavy-Duty Spindle Shaft, Cast Aluminum Housing, Sealed Ball Bearing, Maintenance-Free 
Spindle Pulleys ..................................................................................................................................................Split Steel
Cutter Deck Belts ...................................................................B-section with Kevlar Cord. Self-Adjusting, Self-Tightening
Electric Clutch Type ................................................................................................Ogura Heavy Duty PTO Clutch Brake

HYDRAULIC SYSTEM

3.5 

Hydraulic Oil Filter ......................................................................................................... 40 Micron Spin-on Element Type
Hydraulic Expansion Reservoir ................................................................................................................................Nylon

WEIGHTS AND DIMENSIONS 

 

48 

52

3.6 

Length................................................................................................................................ 73" ....................................73"
Tracking Width ..................................................................................................................47.5" ................................47.5"
Overall Width w/chute down .............................................................................................60.5" ................................64.5"
Overall Width w/chute up ................................................................................................... 49" ....................................53"
Overall Height .................................................................................................................... 43" ....................................43"
Operating Weight .............................................................................................................. 610# ................................ 640#

PRODUCTIvITY 

 

48 

52

3.7 

Cutting Width ..................................................................................................................... 48" ....................................52"
Acres Per Day ................................................................................................................... 18.6 .................................. 20.2
The preceding chart will aid you in determining how many acres your Scag mower will cut per day. The chart is an 
estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.

Содержание Liberty Z SZL48-22KT





























































Отзывы:

Нет отзывов