SCAC YV14-EA190 Скачать руководство пользователя страница 17

13

Section 5

Never remove the gas cap or add fuel with the 

4. 

engine running. Allow the engine to completely cool 
before fueling.

Never fuel the machine indoors or in an enclosed 

5. 

trailer.

Never store the machine or fuel container where 

6. 

there is an open flame, spark or pilot light such as on 
a water heater or other appliances.

Never fill containers inside a vehicle or on a truck 

7. 

or trailer bed with a plastic liner. Always place 
containers on the ground away from your vehicle 
before filling.

Remove the machine from the truck or trailer and 

8. 

fuel on level ground. If this is not possible, then refuel 
the machine with a portable container, rather than 
from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of fuel tank 

9. 

or container opening at all times until fueling is 
complete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing 

10. 

immediately and wash affected skin.

Replace gas cap and tighten securely. 

11. 

ENGINE AIR CLEANER

5.4 

A. CLEANING AND/OR REPLACING AIR 
CLEANER ELEMENT

For  any  air  cleaner,  the  operating  environment  dictates 
the  air  cleaner  service  periods.  Inspect  and  clean  the 
air cleaner element after every 50 hours of operation or 
monthly, whichever occurs first and replace the element if 
required or every 200 hours. Refer to the Engine Operator’s 
Manual furnished with this vacuum for instructions. 

- NOTE -

In extremely dusty conditions it may be necessary 
to check the element once or twice daily to prevent 
engine damage.

WHEELS

5.5 

Check the condition of wheel assemblies after 8 hours of 
operation or daily.

ENGINE OIL

5.2 

A. CHECkING ENGINE CRANkCASE OIL LEVEL 

The engine oil level should be checked after every 8 hours 
of operation or daily as instructed in the Engine Operator’s 
Manual furnished with this vacuum.

B. CHANGING ENGINE CRANkCASE OIL

After the first 20 hours of operation, change the engine 
crankcase  oil  and  replace  the  oil  filter.  Thereafter, 
change the engine crankcase oil after every 100 hours of 
operation or bi-weekly, whichever occurs first. Refer to the 
Engine Operator’s Manual furnished with this vacuum for 
instructions.

ENGINE FUEL SYSTEM

5.3 

 DANGER

To  avoid  injury  from  burns,  allow  the  mower 
to  cool  before  removing  the  fuel  tank  cap  and 
refueling.

A. FILLING THE FUEL TANk

Fill to the top of the fuel filter screen (approximately 1/4 
gallon)  at  the  beginning  of  each  operating  day.  Do  not 
overfill. Use clean, fresh unleaded gasoline with a minimum 
octane rating of 87 and a maximum of 10% Ethanol.

DO NOT use E85 Fuel. Using E85 Fuel will cause severe 
damage to the engine.

To avoid personal injury or property damage, use extreme 
care in handling gasoline. Gasoline is extremely flammable 
and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes and other 

1. 

sources of ignition.

Use only an approved gasoline container.

2. 

When filling the fuel tank, always use the fuel filter 

3. 

screen.

Содержание YV14-EA190


























Отзывы: