SCAC YV14-EA190, Руководство оператора

Страница: 15 / 25

11
Section 4
Plan how to clear a yard or parking lot to reduce 7.
clearing time.
Keep vacuum intake and discharge clean. 8.
Use a slow travel speed when clearing heavy or 9.
large amounts of material.
HILLSIDE OPERATION 4.5
WARNING
DO NOT operate on steep slopes. Poor footing
could cause a slip and fall accident. ALWAYS
FOLLOW OSHA APPROVED OPERATION.
Do not operate on slopes if you are uneasy or 1.
uncertain. Ultimate responsibility for safe operation
on slopes rests with the operator.
Be sure of footing on slopes. 2.
Caution must be used when operating on slopes, 3.
especially when the grass is wet. Wet grass reduces
traction and control.
To prevent tipping or loss of control, keep all 4.
movements on slopes slow and gradual.
Do not turn on slopes unless necessary, and then 5.
turn slowly and down hill when possible.
Be alert for holes, rocks, roots and other hidden 6.
hazards in the terrain. Uneven terrain could cause a
slip and fall accident.
PARkING THE YARD VACUUM 4.6
Park the machine on a flat, level surface only. Do not 1.
park the machine on an incline.
Pull the engine control all the way back to the OFF 2.
position.
AFTER OPERATION 4.7
After the engine has cooled down, wash the entire 1.
machine after each use. Do not use high pressure
spray or direct the spray onto electrical components.
- IMPORTANT -
Do not wash a hot or running engine. Cold water
will damage the engine. Use compressed air to
clean the engine if it is hot.
Keep the entire machine clean to inhibit serious heat 2.
damage to the engine.
DANGER
To avoid injury from burns, allow the engine
to cool before removing the fuel tank cap and
refueling.
REMOVING CLOGGED MATERIAL 4.8
DANGER
ROTATING FAN BLADES
NEVER PUT YOUR HANDS INTO THE VACUUM
INTAkE OR DISCHARGE FOR ANY REASON!
Shut off the engine, remove the spark plug wire
and only then use a stick or similar object to
remove material if plugging has occurred.
If the vacuum intake or discharge becomes plugged, 1.
shut off the engine and remove the spark plug wire.
The engine must come to a complete stop before
removing the debris bag or attempting to remove
plug from inlet or discharge area. Using a stick or
similar item, dislodge the clogged material. Then
resume normal operation.
VACUUM HOSE kIT (OPTIONAL 4.9
ACCESSORY)
A vacuum hose kit is available that plugs into the front of
the yard vacuum. The hose allows easy access for hard
to reach places. Contact your authorized Scag Giant-Vac
dealer for information.