SCAC YV14-EA190, Руководство оператора

Страница: 13 / 25

9
Section 4
CAUTION
Do not attempt to operate this machine unless
you have read this manual. Learn the location and
purpose of all controls and instruments before
you operate.
CONTROLS AND INSTRUMENT 4.1
IDENTIFICATION
Before operating the yard vacuum, familiarize yourself with
all yard vacuum and engine controls. Knowing the location,
function and operation of these controls is important for
safe and efficient operation.
OPERATING INSTRUCTIONS
Engine Control (Figure 4-1). 1.
The engine control
is used to start, stop and control the engine speed.
Push the lever all the way forward to engage the
engine choke before pulling the recoil starter when
starting a cold engine. Once the engine starts, pull
the control back to the detent for full engine speed.
Pulling the lever back will decrease the engine
speed. Pulling the lever all the way back will stop the
engine.
Fuel Control Lever (Figure 4-1). 2.
Used to control
the fuel supply to the engine.
Height Control Lever (Figure 4-1). 3.
Used to control
the height of the vacuum intake. Lift up on the handle
bar and squeeze the height control lever to release
the locking pin. Raise and lower the handle bar until
the desired inlet height has been obtained. Release
the height control lever.
FUEL CONTROL
LEVER
ENGINE CONTROL
STOP (back)
THROTTLE
CHOKE (full forward)
HEIGHT CONTROL
LEVER
Controls and Instruments Figure 4-1.