
Customer Helpline
1300 889 028
14
Maintenance
1. Remove the battery pack before any work on the device.
2. Store the tool, instruction manual and accessories in a secure, dry place. In this
way you will always have the information ready.
3. Keep the tool’s air vents unclogged and clean at all times.
4. Remove dust and dirt regularly. Cleaning is best done with a rag or brush.
5. Never use caustic agents to clean plastic parts.
WARNING: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come into
contact with the tool.
For Battery tools
The ambient temperature range for the use and storage of tool and battery is 0°C to
45°C.
The recommended ambient temperature range for the charging system during
charging is 0°C to 40°C.
Troubleshooting
The following table gives checks and actions that you can perform if your machine does
not operate correctly. If these do not identify/remedy the problem, contact your service
agent.
WARNING: Switch off and remove the battery pack before investigating fault.
Symptom
Possible Cause
Remedy
The tool does not
work
Battery discharged
Battery too hot/cold
Motor is broken
Recharge battery
Allow to cool/warm
Contact customer service center
The battery
pack cannot be
removed
The battery pack release
button is not pressed
Press the battery pack release
button