Customer Helpline
1300 889 028
12
Before Putting Into Operation
1. CHARGING THE BATTERY PACK
CHARGER (SEE FIG. B)
NOTE:
a) Do not use any charger other than that specifically provided for use with the
equipment.
b) If the battery pack is very hot you must remove your battery pack from the charger
and allow time for the battery to cool down before recharging.
c) The battery in your new tool is not charged when it leaves the plant. Therefore it
must be full charged before using the first time.
d) Please charge the battery to reach full or no less than half charge before storage.
If the tool will not be used for long periods of time, charge the battery every 3-6
months.
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet. The light will be green.
2) Slide the battery pack into the charger, the light will turn to red to indicate the
charging process has started.
3) When charging is completed, the light will turn to green. The pack is now fully
charged, unplug the charger and remove the battery pack.
WARNING: When battery charge runs out after continuous use or exposure
to direct sunlight or heat, allow time for the battery to cool down before
re-charging to achieve the full charge.
CHARGING INDICATOR
Light
Status
Red on
Charging
Green on
Fully Charged
2. REMOVING OR INSTALLING THE BATTERY PACK (SEE FIG. C)
Depress the battery release button to release battery pack from your tool. After
recharging, insert the battery pack into tool’s battery port. A simple push and slight
pressure will be sufficient.
2
1
2
1
1
2
7
A1
A2
A4
A3
A5
A6
A7
B
C
D
E